黄冈附近有没有服务

working principle

  • The working principle of jigging machine, to understand it 2020-09-29

    Jigging machine is a kind of product that uses pulse motion to separate the material in the separation medium and then discharge the separated products. As early as the 18th century, jigging machine appeared. With the gradual development of science and technology, jigging machine has also experienced several historical development.

  • How much maintenance do you need? 2020-09-29

    Coal washing equipment jig is one of the important cleaning equipment in jigging coal plant. The working quality of the jig is directly related to the separation effect of the selected materials. In order to make the good working quality of the jig, it is directly related to the separation effect of the selected materials

  • What is the working principle of jig? 2020-09-27

    Jigging machine refers to the equipment to realize the jigging process. The process of separating materials according to the density difference is mainly carried out in the vertical up and down variable speed medium flow. The difference of particle size and shape of materials has certain influence on the results of mineral processing. The medium used in jigging can be

  • How to judge whether jigging machine has normal production? 2020-09-27

    How to judge whether the jig is in normal production? What is the basis for normal production of jigging machine? This paper focuses on the problems we are concerned about one by one: 1. The apparent phenomenon of normal production of jigging machine (1) the washing water pulse of each section of jig is uniform and stable, and the air valve

  • Detailed introduction of jig operation experience 2020-09-16

    The technology of operating jigging machine is a comprehensive measure to comprehensively use the basic knowledge mentioned above. Operators must have basic understanding and judgment on the operation of jigging machine and raw coal washing. On the basis of understanding and judgment, we should have a general goal and achieve it

  • What details should be paid attention to before and after installing jig 2020-09-16

    Jig operators must be aware of the importance of installing jigs. It directly affects whether the jig can work normally in the future. After the jig inspection work is also a top priority. Reasonable installation can ensure the normal operation of the jig and check after installation

  • Detailed analysis of common problems in jig separation process 2020-08-17

    This paper analyzes the common problems in the process of jig separation

  • What kinds of jigs are there? 2020-08-17

    There are several types of jigs? I'd like to sort out some knowledge about jigs, hoping to help you

  • What is the principle of hydraulic moving screen jig? 2020-08-10

    Driven by the hydraulic oil cylinder, the hydraulic moving screen jigging mechanism swings up and down around the pin shaft, and an overflow weir is set in the middle part, and an adjustable gate is set at the front end below the overflow weir to adjust the opening size between the overflow weir and the screen plate. Sieve plate under overflow weir

  • What is the working principle of moving screen jig? 2020-08-10

    2020 is an extraordinary year for Chinese people. The new type of coronavirus pneumonia is rampant throughout the country. For the sake of everyone's health, China has postponed the arrangement of returning to work. However, the failure to return to work on schedule is undoubtedly for our customers, peers and ourselves

  • We know that different jigs have different ability to choose equipment and minerals 2020-07-10

    The length of the jig screen surface mainly depends on the material characteristics, washability, quality requirements of the selected products, as well as the quality requirements and sorting accuracy of the products. It has high separation accuracy and long separation time in the bed.

  • Jig equipment, each hour can reach about 40 tons, the recovery rate is very high 2020-07-10

    What equipment can be used to select water slag? It is recommended that you use jig equipment. Jig is very successful in water slag separation. It is widely used in all parts of the country. The types of jigs we use include LTA series and trapezoidal jig equipment. Why do we choose jigging

  • In the history of coal preparation, jigger has been used for more than 100 years. The jig is a fixed sieve type, which is suitable for metal ore dressing 2020-06-15

    It has been used for more than 1840 years. The piston type jig has been used for more than 1840 years. As technology advances and

  • In addition to being used alone, jigs are often used in combination with other mineral processing equipment 2020-06-15

    Jigging beneficiation is an ancient mineral processing method. It has a history of more than 400 years since the use of jigging beneficiation in labor. It is still a common mineral processing method for ores with large specific gravity difference and coarse and medium grained distribution of useful minerals.

  • Xiaobian suggests that you must do jigging test before purchasing equipment 2020-05-24

    Which jig is more suitable? This depends on the monomer dissociation degree of your ore

  • There are several reasons for the serious run-off of jigging machine 2020-05-22

    With the rise of jig, an energy-saving, efficient and environmental protection gravity mineral processing equipment in the field of mineral processing equipment, the market demand has risen sharply, and a large number of jigging machine manufacturers have emerged. The product quality is uneven and the technical level is different

  • Reduce the overload or under load of jig and improve separation efficiency 2020-05-14

    In gravity beneficiation, the energy saving of jig is prominent. Its main characteristics are low energy consumption, which can not only reduce the operating costs and processing costs, but also protect mineral resources. With the rapid development of society and technology, energy-saving mineral processing industry has become more and more important

  • The size and structure of the jig 2019-12-11

    If other conditions are the same, the air source pressure of impact crusher is higher, and the opening can be small letters. The resistance of air and water in jig is larger along the way, and the air intake area also needs to be larger. According to the statistics of some types of clamps at home and abroad, the damper has been widely used

  • What are the functions of these parts of jig? 2019-11-11

    What are the functions of these parts of jig? The whole is made up of many parts. Multiple components make up a complete machine. The function of this part is usually very large. Now let's look at the various parts of the fixture. The sieve plate of the fixture takes the main body as the supporting bed

  • Some points for attention when classifying waste from waste crusher of jig 2019-11-11

    Several points should be paid attention to when classifying waste from the waste crusher of jig. The jig is the equipment to realize the jig process. Materials are classified by the density difference in the vertical lifting variable speed medium flow. The difference of particle size and shape of material has a great influence on mineral processing results