黄冈附近有没有服务

Ore washing equipment

spiral washer

Introduction and application of spiral stone washing machine: the rotor of spiral stone washing machine adopts central structure, the spiral blade is installed on the central shaft, and the reducer is connected to the central shaft to work. With the help of different specific gravity of solid particles, the settling velocity in liquid is different

thirteen billion five hundred and thirteen million eight hundred and ninety-three thousand nine hundred and ninety-nine

product details

Introduction and application of screw stone washer:
The rotor of the spiral stone washing machine adopts the middle structure. The spiral blade is installed on the intermediate shaft and connected to the intermediate shaft by the reducer. With the aid of the principle that the specific gravity of solid particles is different, so the settling speed in the liquid is different, a kind of equipment for mechanical classification. Spiral stone washing machine is used for desliming and screening of a large amount of sand and stone used in construction sites, sand and gravel factories, prefabrication plants and hydropower construction sites, and also for ore dressing. The spiral stone washing machine uses the screw to push the stone to separate the stone from water and soil, so the stone is clean but the output is slightly lower. The internal structure of spiral stone washer is composed of tank body, reducer, motor, intermediate shaft, spiral blade and bracket. The bracket is welded on the intermediate shaft, and the spiral blade is pressed with bolts after being installed to prevent the blade from sagging and deformation.
The main features of spiral stone washer are as follows
1. The cleaning and lifting conveying of screw stone washer are carried out at the same time, and the processing capacity is strong.
2. The discharge water content and mud content of spiral stone washer are low.
3. The structure of the screw stone washer is simple, and the volume is small, which is easy to arrange and install.
4. The spiral blade of spiral stone washer is made of wear-resistant and impact resistant high chromium cast iron, which is fixed by bolts and easy to replace.
Long service life of screw washer.

Installation and commissioning of screw stone washer:
1. After the screw stone washer is transported, the user should immediately check whether all parts are complete and whether there is any damage. The installation can be carried out only after the product is confirmed to be intact.
The concrete washing machine should be installed on the concrete foundation according to the concrete situation of the user.
3. During the installation, the spiral stone washer must be installed according to the requirements of the installation drawing and ensure the correct tilt angle.
4. The motor of the screw stone washer is installed on the guide rail to adjust the belt tightness. The belt pulley and motor pulley should be parallel during installation.
5. After adjustment according to the above requirements, rotate the rotor disc several times to check whether there is jamming, collision and other phenomena.

Product parameters

Treatment capacity

(mm)

Sand return

(t/h)

power

(kw)

Machine weight

(kg)

8-40

3-8

four

one thousand and nine hundred

20-100

5-15

five point five

two thousand and five hundred

50-130

8-70

seven point five

three thousand and one hundred

240-300

80-130

eleven

nine thousand and eight hundred

280-500

100-200

fifteen

fourteen thousand and two hundred

 

 



No more

Next: no more

Related news